New Magellan ProMark3 RTK05/04/2007 |
|
| Magellan (CA, USA) has introduced its ProMark3 RTK, designed to provide surveyors with centimetre accuracy in a real-time solution. ProMark3 RTK includes new real time capabilities in addition to its existing complete post-processing and mapping features. | |
|
BLADE technology enables ProMark3 RTK to outperform single-frequency RTK receivers and grants real-time performances in a lightweight handheld system. This technology uses dual satellite systems (GPS + SBAS) to drive rapid initialisation, reliability and real-time centimetre level accuracy to make the ProMark3 RTK a new reference for RTK surveying.
ProMark3 RTK also offers the option of FAST Survey. This field software is typically associated with more expensive RTK systems and makes it possible for experienced professional surveyors and novice RTK users alike to run complete survey jobs, including stake-out, roading, combining projects done in association with total stations, and much more.
Current ProMark3 users can upgrade their systems with the new RTK version. ProMark3 RTK is planned for May release. Source: Magellan Website: http://pro.magellangps.com Supplier: 0 More news from this supplier: Latvian Forest Service to Replace Compass and Measuring Tape Magellan Introduces MobileMapper 6 Magellan ProMark 500 GNSS RTK Receiver Poland Selects MobileMapper CE Magellan MobileMapper CX Magellan DG14 RTK GPS Board Magellan’s BLADE GNSS Signal Processing CyberCity 3D Launches 3D Solar Buildings Second UltraCamX for Valley Air Photos Capacity Building to Develop Afghan Mining Feasibility Reports for Uganda and Jordan NSDI Five-metre Imagery for Vegetation Analysis UAE University to Receive Professional GIS Training Topcon Great Britain Positioning Business Manager United Oilfield Services Select Sercel UNITE Mars-bound Instrument Detects Solar Burst's Effects Blom to Divest Danish Subsidiary 
Comments (1):
|
| Product News |
| Product News > New Magellan ProMark3 RTK |
ProMark3 operates in two modes; base + rover and rover only. The rover can be connected to a real-time network through a GPRS-enabled cell phone using NTRIP and direct IP. The second mode of RTK operation, base + rover, employs an efficient plug-and-play spread-spectrum radio solution that does not require a license or separate configuration integrated with ProMark3 RTK.
|
Interactive |
3D Scanning of Historic Sugar Factories |
|
The Alliance for Integrated Spatial Technologies at the University of South Florida, USA, recently worked with the Florida Park Service on a project to document the remains of several historic sugar-mill sites in the State Parks to create as-builts to be used in preservation and conservation of these resources. The FARO LS 880, along with GPS and total station georeferencing and colour imaging, was used on these projects.
|
| Last 5 items: |
| 3D Scanning of Historic Sugar Factories |
| Road Improvement Survey with UAV |
| 3D BIM + money = 5D |
| Setting up a survey in a swamp |
| Launch of the 9th Baidu Satellite |
