Poll

Are you considering working with an UAV for surveying?


Spacer
News
News > Dorset Bypass Plans Utilise LiDAR Data

Dorset Bypass Plans Utilise LiDAR Data

  19/11/2009
Dorset's A35 and C6 roads form a crucial link down to the county's south coast. With a view to improving this link, Dorset County Council has commissioned multidisciplinary engineering consultancy Buro Happold to prepare a feasibility study into bypass options. In order to accurately understand the features of the local terrain, the consultancy has used UK-based specialist Bluesky's 3D map system, which creates digital maps captured by aircraft mounted lasers.
lidar 

Bluesky have also supplied high-resolution aerial photography that has been used to create 3D fly-throughs and visualisations of the resulting designs.

 

Using 12d Model, a powerful terrain modelling and civil engineering software package, Buro Happold has expanded on an earlier feasibility study and prepared three options for the bypass. The detailed terrain model has allowed the designers to minimise any impact on the environment, particularly the associated costs of cut and fill operations.
 
"The size of the study area meant a traditional topographic survey was simply not feasible due to cost implications," commented Neil Harvey, Senior Engineer in Buro Happold's Highways and Infrastructure division. "However, for the same price as a relatively small ground survey, we were able to acquire very accurate terrain measurements and high-resolution aerial photography of the entire study area. These have proved instrumental in progressing the feasibility study and preparing designs for each of the three options. The aerial photography will also be fundamental in communicating these designs during a future public consultation period as they provide real world detail to our computer generated models." 
 
In order to capture the highly accurate LiDAR (Light Detection and Ranging) data, a survey aircraft equipped with a system of lasers was used. Lasers were beamed to the surface and the time taken for the beam to be bounced back to aircraft-mounted receivers was recorded. Using the known position of the aircraft (derived from on-board satellite positioning equipment), the time taken for the return of the laser beam and the known value of the speed of light, the distance between the aircraft and ground is calculated. Additional readings can also be taken to determine the height of buildings, vegetation and other surface structures.
 
The Bluesky LiDAR data forms part of a detailed 3D terrain map, available online, that covers most of England and Wales including all major urban centres, coastal areas and flood plains. Aerial photography for the whole of England, Wales and parts of Scotland is also available to view and purchase online. For more information, visit www.bluesky-world.com.





Read more about:  software  satellite  maps  3D  LiDAR 
Supplier: Bluesky International

More news from this supplier:
Online Lidar Map of Britain
Urban Regeneration in North-east England Using 3D Model
EUR2.4 Million for Green Energy Research
3D Computer Models Aid Railway-station Redesigns
Map of Birmingham's City Life
Free Electricity Potential
Warrington 3D Model Helps Change
3D Models for Kent County
How We Lived Then - a Bird's-eye View
UK Heat Loss Mapped


GMES Initial Operations (GIO) Land Monitoring Services
Rugged Trimble Juno Series
Olympic Planning Rerouting During Olympic Congestions
Dutch Minister to Open Geospatial World Forum 2012
TatukGIS Developer Kernel 10 Upgrade
Netcad Asia Convention
Community Heritage Project Using GIS Visualisation
Teaching Award for Russell G. Congalton
ION Autonomous Snowplough Competition Winners
GeoCore 2012 with Lidar API


     


Comments (0):
There are no comments yet.
Make your comment:
Name:
Your comment:
Type over the 2 words (or number) from the picture
 
Most Popular articles Most Popular News Most Popular Jobs
Spacer


Spacer
Spacer
Spacer
Spacer
 

Interactive


3D Scanning of Historic Sugar Factories

The Alliance for Integrated Spatial Technologies at the University of South Florida, USA, recently worked with the Florida Park Service on a project to document the remains of several historic sugar-mill sites in the State Parks to create as-builts to be used in preservation and conservation of these resources. The FARO LS 880, along with GPS and total station georeferencing and colour imaging, was used on these projects. 

 

 Last 5 items:
 3D Scanning of Historic Sugar Factories
 Road Improvement Survey with UAV
 3D BIM + money = 5D
 Setting up a survey in a swamp
 Launch of the 9th Baidu Satellite
 
Spacer
Spacer
Spacer
Spacer
Spacer